|
Designed using the latest 3Gbits/sec chipset from Silicon Image (SIL3124), this
Multilane (4 lane) connector equipped controller incorporates many advanced features that are
usually found only in much more expensive RAID controllers
Can be easily configured as 4 individual drives with no RAID or as RAID 0 (striping), RAID 1 (mirroring), RAID 1+0 (mirrored stripe), and RAID 5 (parity stripe)
or JBOD (combining all 4 drives into one large capacity hard drive). When installed into
a fast PCI-X 133 MHz slot, this controller ensures maximum data throughput of up
to 3 Gbits/sec per lane. Sustained throughput of over 200 Mbytes/sec can be achieved using standard
7,200 RPM SATA II hard drives by setting up 4 drives in a RAID 0 configuration.
In addition, the External SATA Multilane Infiniband connector also provides a
very secure cable connection, improved durability and increased EMI protection
to a SATA Multilane enclosure.
Features:
- SATA II compliant
- PCI-X and PCI BUS compatible
- 4x Multilane connector (screw type)
- Up to 3 Gbits/sec (300 Mbytes/sec) per lane
- Backward compatible with Serial ATA 150 (SATA 1.5Gb/s) drives
- RAID 0, RAID 1, RAID 1+0, RAID 5 and JBOD support
- 48-bit LBA supports large capacity drives (supports SATA I and SATA II drives of any
capacity)
- Supports Native Command Queuing (NCQ)
- Upgradeable firmware
- Supports SATA II disk hot plug (hot swap drives without system shut
down)
What's In the box:
Specifications:
- 4x Multilane Infiniband port (screw type)
- PCI-X /133 MHz (compatible with PCI 32/64 bit)
- One Year Warranty
System Requirements:
- SATA Multilane compatible
enclosure
- Pentium III 700Mhz or faster desktop computer
- 128 MB RAM or more
- Available PCI-X slot or 32/64 bit PCI slot (PCI-X slot required for maximum performance)
- Operating Systems:
- Windows 2000
- Windows XP
- Windows Server 2003
|
